Tools

Part Description: Starter Buddy

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: 48V LOADpro Dynamic Test Leads

Details:

Features and Benefits:

• Plug in these test leads to your DMM and you're doing Voltage Drop tests on the fly
• Finds these problems fast - High corrosive resisistance - shorts to ground - open circuits
• On a 48 Volt system, pressing the switch applies a load of 1 amps across the circuit
• This simple test finds problems in corroded wires/connections and shorts to ground
• Finds problems fast & simplifies the process of voltgage drop testing

LOADpro performs voltage drop test with the push of a button.  On a 48 Volt system, pressing the switch applies a load of approximately 1 amps across the circuit.  This effective test, finds problems.  The original version of this tool is OEM for Caterpillar, Volvo and UPS.  The industry has endorsed this product for the simple reason that it finds problems and it is easy to use.  This new version features the capability to test electrical systems up to 48 volts, while the original LOADpro can only test up to 24 volt systems. 

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: Relay Buddy - Automotive Relay Tester

Details:

Features and Benefits:

• Tests 4/5 Pin Relays - 3 different relay types
• Tester uses 12V battery from vehicle, cycles the relay 10 times
• Relay Buddy will fail the relay if one of the cycles proves unsuccessful during the test
• Automatic Test with Good/Bad Indication - switch contacts loaded to detect excessive resistance
• Quick and easy "off the car" relay test

Relay Buddy is a quick go / no-go tester for the most common automotive relays. It provides you with an indication of the general health and functioning of the relay switch contacts and coil. Relay Buddy will check the control side of the relay by applying a signal to the relay coil while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay several times during each test session as it watches for consistency in every cycle. Relay Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful during the test session.

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: New Relay Adapter Set

Details:

Features and Benefits:

• Test two new relays with your Relay Buddy!
• 2 pack of adapters allows testing of two new relay types - commonly used for fuel pumps and other powered devices
• Relay adapter plugs into Relay Buddy first
• Relay then plugs into the top of adapter
• Works with 190 Relay Buddy

From the very introduction of 190 Relay Buddy, we've had the request to add adapters which could expand the testing coverage.  These adapters expand to five, the total number of relay types which can be tested by Relay Buddy.

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: Diagnostic Relay Buddy 12/24

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: Diagnostic Relay Buddy 12/24 Pro Test Kit

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: Trailer Wiring Buddy 7 Pin Flat

Details:

Features and Benefits:

• Tests round 7 Pin connectors with flat pins
• Each signal from vehicle emits a unique tone
• Electric brake control signal illuminates red LED
• Time Saver! Just apply brakes, right/left turn signals, running lights, engage reverse and 12 Volt Charging voltage
• Loud beep can be heard over shop noise

Just plug the Trailer Wiring Buddy into the vehicles trailer harness, go to the driver's seat and operate the controls.  Each signal from vehicle emits a unique beep, which can be heard over shop noise.  It is simple and easy to use - it saves time! 
Lighting circuits tested:
• Left Turn Signal
• Right Turn Signal
• Brake
• Running Lights
• Reverse
• 12 Volt Charging
• Electric Brake Control

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: Short Buddy® Audible Trouble Shooter

Details:

Features and Benefits:

• Short Buddy helps you find the short!  A system of audible beeps helps you find the problem and permit hands free troubleshooting
• Have a dead short? Short Buddy gives you continuous re-set/re-power capability - no more pile of blown fuses
• Have an intermittent?  While you push, pull, tug and grab wires and harness connectors, Short Buddy is always watching the current level - if the circuit current changes by more than approximately .3 Amps, you’ll hear a loud beep
• Settable Amp Levels of 10, 15, 20, 25 and 30 Amps.  Automatically opens the circuit in event of overload
• Great tool for shorts, intermittent drop outs and flaky grounds and connections - a real time saver

This innovative tester frees up the technicians hands for testing and repair. No need to hold test leads or look at a DMM to locate shorts. Simple, fast installation works in-line with vehicle fuse circuit. Includes blow molded storage case.

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: Fuse Buddy Tester - Mini Fuse

Details:

Features and Benefits:

• Designed specifically for circuit testing, Fuse Buddy plugs right into fuse socket - easy connection for circuit current testing
• Fuse Buddy will measure circuit amperage from 0 to 20 Amps - time saving design
• Unique design incorporates removed fuse to maintain circuit protection
• Test range 0 to 20 Amps
• .01 Amp resolution

Circuit testing made EASY! The Fuse Buddy Tester connects directly into the fuse socket, measuring from 0 to 20 Amps. No more clumsy connections at the fuse box, adapter fitting plugs directly into fuse socket and stays put. Removed fuse is plugged into the Fuse Buddy maintaining circuit protection. Great for diagnostic troubleshooting and parasitic drains.

Brand: Electronic Specialties

Warranty: Repair only up to 1 yr

Part Description: Fuse Buddy DMM Adapter - ATC Blade

Details:

Features and Benefits:

• The ends are molded into the shape of the fuse itself
• Uses existing fuse to maintain overload protection
• Convenient way to connect your DMM or hand held scope
• Connects DMM or Hand Held Scope directly into circuit - time saving product - fits snug into fuse socket for more accurate measurements

Brand: Electronic Specialties

Warranty: Repair only up to 1 yr

Part Description: Fuse Buddy Tester - ATC Blade

Details:

Features and Benefits:

• Clear display screen
• Has a .01 Amp resolution
• Its designed specifically for circuit testing
• Measures from 0 to 20 Amps

Circuit testing made EASY! This tester connects directly into the fuse socket, measuring from 0 to 20 Amps. No more clumsy connections, Fuse Buddy fits tight and stays put. The removed fuse is plugged into the tester, maintaining circuit protection. Its designed specifically for circuit testing, plugs right into fuse socket.  Great for diagnostic troubleshooting and parasitic drains.

Brand: Electronic Specialties

Warranty: Repair only up to 1 yr

Part Description: 30 Amp Fuse Buddy Tester - ATC Blade

Details: Features and Benefits

• Great for motor blowers
• Original fuse is replaced in-line during testing, thereby maintaining circuit protection
• Great tool for electrical troubleshooting at the fuse box
• Can be used on all circuits up to 30 Amps
• Test range: 0 – 30 Amps ~ 48V DC ~ .1A resolution

Brand: Electronic Specialties

Warranty: Repair only up to 1 yr