Tools

Part Description: OBD II Cable

Details: OBD II Replacement Cable for CP9145, CP9150, CP9185, CP9190

Brand: Actron

Warranty: 30 day warranty on material and workmanship

Part Description: Fuse Lead Automotive DMM Test Leads

Details:

Features and Benefits:

• In the event of current overload, automotive fuse blows, not your DMM's internal fuse!
• Provides extra overload protection -ATC fuse holder in-line
• Saves you time if you don't have to shop for a new DMM fuse
• For use with any Digital Multimeter
• Extra layer of protection for your measuring instrument and you!

Fuse Lead can save time, techs hate blowing the little fuse inside their DMM.  Most shops stock automotive fuses, so it makes sense. 

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: The Mag Lead

Details: Features and Benefits

• Very helpful for automotive reference points and troubleshooting
• Can eliminate the need to hold probes while checking or monitoring a signal
• Two high power, low resistance magnets hold the probe to the lead
• Fits almost all Digital Multimeters and can be used with hand-held scopes too
• Get the Mag Lead, it stays put and won’t fall off, like alligator clips do!

Brand: Electronic Specialties

Warranty: Repair only up to 1 yr

Part Description: Mag Lead with Alligator Clip Set

Details: Features and Benefits

• 54" test lead set and alligator clips
• Just disconnect the test probe and you can "stick" to any metallic ground or test point
• Very helpful with automotive reference points and troubleshooting
• Can eliminate the need to hold test probes while checking or monitoring a signal
• Time saving product, can substitute for alligator clips at metallic test points

Brand: Electronic Specialties

Warranty: Repair only up to 1 yr

Part Description: Pro Test Lead Kit

Details:

Features and Benefits:

• Professional set of interchangeable test leads designed for automotive diagnostics
• Extended test lead length of 64" / 162 cm
• Flexible silicon back probe pins used for sliding into automotive connectors like those on fuel injectors and MAP sensors
• Compatible with most DMM's and scopes
• Kit packed in roll-up storage pouch

Kit includes: test probes, silicon back probe pins, bed of nails clips, heavy duty insulation piercing clips, crocodile clips and interconnect leads - 64". The large crocodile clips are good for clipping to grounds and battery terminals.

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: Interconnect Test Leads

Details:

Features and Benefits:

• Connects with numerous test adapters and most test lead kits
• Terminates with standard 4mm female banana plug
• Extended length of 64 inches
• CATIII 1000V safety rated - safe for use on Hybrids & EV's
• Works will all of ES brand test lead accessories

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: Heavy Duty Insulation Piercing Test Clips

Details:

Features and Benefits:

• Extended probes allow connection through wire's insulation when a direct connection is not possible
• Maximum 5 amps test current
• Maximum 1000 Volts
• Includes both red and black probes
• Quality test probes

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: Automotive Test Lead Kit

Details:

Features and Benefits:

• Test Lead Kit includes our basic set of interchangeable specialty test probes designed for automotive use
• Six piece set includes storage pouch for safe keeping
• The flexible back probing pins are great for sliding into automotive connectors like those on fuel injectors and MAP sensors
• Includes: Interconnect Leads (64 in.), Test Probes, Flexible Silicon Back Probe Pins, Shielded Alligator Clips, Large Crocodile Clips and Pouch
• Nice kit, this covers all the basics and then some

The large Crocodile Clips are good for clipping to grounds and battery terminals. Roll up storage pouch keeps your leads organized.

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: 54 Piece Automotive Test Connector Kit

Brand: Electronic Specialties

Warranty: 90 day warranty on material and workmanship

Part Description: 48" Stacking Banana Plug Test Leads

Details:

Features and Benefits:

• Stackable 3-way banana plug test lead
• High flexibility wire
• 48" length
• Standard 4mm banana plug
• Use with numerous specialty test adapters

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: 18 Piece 64 Test Connector Kit

Details:

Features and Benefits

• Small, low current type of connectors to Micro64 terminals
• Includes 48 inch stacking banana plug test leads
• Connection to most DMM's and scopes
• Provides a quality & secure test connection
• 18 pieces

Test connector kit featuring a variety of terminal adapter sets
which enable connection to Micro64 terminals - primarily
found on GM vehicles and some EU/Asian/Domestic
vehicles. Adapters connect via the included 48 inch
stacking banana plug test leads. Connection to most
DMM’s and scopes is no problem. Kit is designed to
provide a quality & secure test connection while quickening
the test process.
 

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: Deutsch Test Connector Kit

Details:

Features and Benefits:

• Includes sizes: 14, 16 and 20 Deutsch connectors, both male and female
• Tap live readings with included 48" stacking banana plug test leads
• Use with your scope or DMM for troubleshooting electrical problems
• Provides quality and secure test connection, while quickening the test process
• Deutsch connectors are found in agricultural, construction, automotive, motorcycles and industrial applications

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: ESI149 - Universal Test Connector Kit

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: LOADpro® Dynamic Test Leads

Details:

Features and Benefits:

• LOADpro® Test Leads load the circuit to see if current can flow
• LOADpro® identifies these problems fast: High corrosive resistance, Shorts to ground and Open circuits
• By loading the circuit, LOADpro® makes a voltage drop test “on the fly”, just press the switch – the test results can not lie!
• Use LOADpro® with your Digital Multimeter and follow our test method - you will find wiring faults quicker
• SteadyPin Probe Tips

LOADpro® performs voltage drop test with the push of a button. On a 12 Volt system, pressing the switch applies a load of approximately .5 Amps across the circuit. This simple test finds problems in corroded wires/connections and shorts to ground. Works with your existing Digital Multimeter. Instead of a pointed probe, SteadyPin tips have a small recess at the tip that allows the probe to sit firmly on a male ECM or connector pin. Traditional pointed probes fail to give an effective connection and creates difficulties in completing manufacturer specific voltmeter tests.

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship

Part Description: LOADpro® Bundle - Dynamic Test Leads and Fundamental Electrical Troubleshooting Book

Details:

Features and Benefits:

• LOADpro® Test Leads load the circuit to see if current can flow
• LOADpro® identifies these problems fast: High corrosive resistance, Shorts to ground and Open circuits
• By loading the circuit, LOADpro® makes a voltage drop test “on the fly”, just press the switch – the test results can not lie!
• Includes ESI182 FET book - 200 pages of basic electricity explained in a way that make it useful in the shop
• SteadyPin Probe Tips

LOADpro® performs voltage drop test with the push of a button. On a 12 Volt system, pressing the switch applies a load of approximately .5 Amps across the circuit. This simple test finds problems in corroded wires/connections and shorts to ground. Works with your existing Digital Multimeter. Instead of a pointed probe, SteadyPin tips have a small recess at the tip that allows the probe to sit firmly on a male ECM or connector pin. Traditional pointed probes fail to give an effective connection and creates difficulties in completing manufacturer specific voltmeter tests.

Brand: Electronic Specialties

Warranty: 1 yr warranty on material and workmanship